PED5- Personal Evacuation Device

The PED5 is used for confined space or work and rescue tasks. The device can work with a bosuns chair, harness, rescue sling and attached to either portable anchorages such as Tripods, Davits or fixed structure. The kernmantle rope runs through a top and bottom pulley and the user can either ascend or descend independent of any other person. Control is maintained by the ascender, which can be either right or left handed. In rescue, or as an assist, another person can help raise or lower the user with an ascender, independent of the person in the chair or harness.

• Lightweight head and bottom pulley
• Compact
• Self contained in bag
• Excellent heat dissipation during prolonged use
• Stop at any point
• Easy to use

PED3- Personal Evacuation Device

The PED3 is a compact abseil and evacuation device ideally suited as an emergency escape from high rise buildings, wind turbines, structures, cranes and reach trucks. It can also be used effectively as a controlled abseil device for multiple evacuations.

• Lightweight
• Compact
• Self contained in bag
• Excellent heat dissipation during prolonged use
• Stop at any point, with additional friction device
• Easy to use

PED-10 Personal Evacuation Device

The PED10 is the original abseil and evacuation device which can be run on either fibre rope or steel wire, this gives it great flexibility. Ideally suited as an emergency escape device from high rise buildings, structures and particularly Oil Rigs where longer descents, increased
weight, variable speed and fire resistance is required. It can also be used effectively as a controlled abseil device, for multiple evacuations and challenging rescues via an optional hand wheel for lifting functions. Special brackets can be fabricated to install at the top of ladder frames for rescue.

• Lightweight
• Compact
• Fibre rope or steel wire rope
• Excellent heat dissipation during prolonged use
• Stop at any point, with additional friction device.
• Easy to use

MA- Multi Access

Where accessibility is a problem the Multi Access’ light, compact construction makes its scope of application nearly limitless. Where in most cases a hydraulic lifting platform or a scaffold cannot be used and would be expensive, Multi Access can demonstrate its true versatility.

After establishing the two suitable suspension points, Multi Access is ready to use. Now the user can carry out any number of operations on any kind of building, façade, industrial plant or wind power plant.

• Quick release governed by centrifugal brake
• Quick lifting through efficient gearing
• Completely mechanical

Introducing Xcape Pack

Innovative, compact and simple fallen worker and self rescue kit. Uses traditional rope friction technology to create a light weight, effective emergency escape and rescue device.

Fits in to a small hip pack which connects to your harness waist belt or alternatively can be discretely stowed.

Used extensively in the energy and telecommunication industry.

•Xcape Pack is a Registered Trade Mark of Checkmate Limited.

Kit 8 - Gotcha Rescue

The Gotcha rescue kit is a unique solution to a problem faced by all workers at height who use PPE for protection against falls. Whereas most rescue provision has focused on the more extreme activities carried out at height, the Gotcha kit is designed for tradesmen who use common items of fall protection. In the event of a fall their situation if suspended in a harness is just as serious as any other worker and a swift recovery is essential. The kit will work effectively with conscious or unconscious casualties, the rescuer can carry out the rescue from a point of safety, the rescue can be carried out by a single person, no cutting is required and you can raise or lower the casualty in a controlled manner to the nearest point of safety.

• Suitable for Rescue from –Fall Arrest Lanyards and Fall
Arrest Blocks
• This is a no-cut kit –The casualty is raised to release
their original attachment
• Rescue direction – You can raise or lower the casualty
with this kit
• Pre-assembled – No assembly is required by the user
• Remote attachment – The casualty can be attached
from a point of safety
• Single person use - The Gotcha is for raising or
lowering a single person
• Colour coding - The kit is colour coded for simplicity   

Rope Access- Specialist Hardware

The PBH5 riggers harness is the ultimate harness for rope access and rigging, it can be used with a wide range of technical hardware and configured for most rescue and difficult access situations.

Technical hardware includes, but is not limited to, the following:

• Descender
• Rope Grab
• Karabiners
• Rigging plates
• Pulleys
• Rescue pulleys
• Ascender