Skip to main content

Corner Bracket Without Post - checkline II

The Corner Bracket is mounted onto the Adjustment Body and is used to support the 8mm wire rope.

This assembly is fixed directly onto the required surface where a post assembly is not required. Corner tubes are required to complete the assembly, normally 45°, but other versions are available to suit the wall angle. This bracket has the ability to be rotated through 180° and set at intervals of 30°.

Principal Materials

  • Adjustment Body & Intermediate Bracket Cast Stainless Steel - Electro Polished
  • M10 Cap Head Bolt Stainless Steel with Loctite
  • Reducing Sleeve Nylon

Standards

  • These components form part of the Checkmate EN795 system.

Dimensions

TDS-49-CORNER-WITHOUT-POST-IS4-(511)-2
TDS-49-CORNER-WITHOUT-POST-IS4-(511)-1

Disclaimer

Component must be used as part of a complete Checkmate Checkline SLL system, comprising of Checkmate components ONLY.

Structural engineer approval is required by building owner. Specifying and installing Checkline requires training and written approval from Checkmate – contact Checkmate for details.

Products: Installed Systems Back to: Corner Bracket Without Post checkline II

Thank you for your interest in Corner Bracket Without Post

Please enter your email address to receive more information about Corner Bracket Without Post.