Skip to main content

PBH02D - dielectric harness

Designed for the Utilities market, and specifically overhead line teams doing hands on “hot glove” work on live wires, the PBH02D features electrically insulated non-conductive fittings, ensuring that there are no metal components in close proximity to live conductors.

Product Features

  • Anchorage Connection Front and rear “D” attachment points.
  • Fittings Plastic coated pressed steel fittings offering a minimum 9kV dielectric resistance.
  • Webbing Polyester webbing with two colour body to leg for easy identification when donning.
  • Weight 1.6kg
  • User Weight 150kg Maximum [Including tools and equipment]

Standards

  • EN 361
TDS-82-PBH02-Dielectric-IS4-4

Dielectric Fittings

Plastic coated pressed steel fittings offering a minimum 9kV dielectric resistance.

TDS-82-PBH02-Dielectric-IS4-5

Rear D Assembly

The adjustable rear “D” is compatible for safe connection to any EN compliant fall protection system.

TDS-82-PBH02-Dielectric-IS4-6

Adjustment Points

Body and Leg adjustment ensure a snug fit can be achieved and maintained. The dielectric buckles prevent metal to metal contact.

TDS-82-PBH02-Dielectric-IS4-7

Contrast Stitching

Grey contrast stitching is used so that on inspection, prior to donning, the user can determine the integrity of the harness.

TDS-82-PBH02-Dielectric-IS4-8

Adjustment Points

Body and Leg adjustment ensure a snug fit can be achieved and maintained. The dielectric buckles prevent metal to metal contact.

TDS-82-PBH02-Dielectric-IS4-9

Label Pouch

All individual harness information is kept secure inside the label pouch for protection and easy reference.

Product Features

The PBH02D is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.

Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted for fall arrest but is primarily for work positioning.

The PBH02D must be used in conjunction with an energy absorber or load limiting device.

Maximum impact force 6kN.
Recommended minimum anchorage strength 12kN.

  • 1. 100% Polyester webbing
  • 2. Sternum attachment
  • 3. Adjustable leg loops
  • 4. Adjustable rear D assembly
  • 5. Dorsal attachment
  • 6. Back strap/Label Pouch
  • 7. Pelvic strap
TDS-82-PBH02-Dielectric-IS4-17
1
2
3
4
5
6
7
Products: Vantage Back to: PBH02D dielectric harness

Thank you for your interest in PBH02D

Please enter your email address to receive more information about PBH02D.