Skip to main content

PBH02R - two point reflective harness

The PBH02R offers high reflectivity to increase visibility in even the most adverse weather conditions. The reflective properties will benefit users working in darkness, poor visibility conditions, confined spaces with low light levels and in general industrial use. Lightweight, easy to don with four points of adjustments to ensure a better fit. Available with carbon steel or stainless steel fittings this harness is suitable for fall arrest and work restraint as well as work positioning on inclined surfaces via a rope and grab.

Vantage Logo
Make an Enquiry

Product Features

  • Attachment Points Rear D fall arrest attachment point (Dorsal)
    Front D fall arrest attachment point (Sternum)
  • Fittings Carbon steel, black powder coated
    Stainless steel (optional)
    Dielectric fittings (optional)
  • Webbing Reflective polyester webbing, water repellent & UV resistant
  • Padding Optional detachable shoulder yoke - thermo formed
  • Weight 1.1kg
  • User Weight 150kg Maximum [Including tools and equipment]


  • EN 361

Attachment Point

The front and rear “D” rings are safe to connect to any EN compliant fall protection system.


Reflective Webbing

Reflective yarn woven into the webbing for increased visibility.


Label Pouch

All individual harness information is kept securely inside the elasticated label pouch for easy reference and protection.


Trapezoidal Buckles

Angled buckles ensure that harness webbing follows the contours of the body for a more comfortable and secure fit.


Contrast Stitching

Contrast stitching is used for easy inspection, prior to donning.


End Stops

Webbing ends are finished with a tactile, branded rubber end stop.


Fall Arrest Indicator

Fall arrest indicating tabs allow the user to easily and confidently determine if the harness has been subjected to fall forces.

Product Features

The PBH02R is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.

Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted but is primarily for work positioning.

For fall arrest the PBH02R must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN.

Recommended minimum anchor strength – 12kN.

  • 1. 100% Polyester Webbing
  • 2. Sternum Fall Arrest Attachment
  • 3. Trapezoidal Buckles
  • 4. Dorsal Fall Arrest Attachment
  • 5. Back support and label pouch
  • 6. Fall Indicator Tabs
  • 7. Pelvic Strap
Products: Body Harnesses Back to: PBH02R two point reflective harness

Thank you for your interest in PBH02R

Please enter your email address to receive more information about PBH02R.