Skip to main content

PBH04 - four point harness

Our standard 4-point fall arrest safety harness with a rear ‘dorsal’ and a front ‘sternum’ fall arrest point as well as 2 side work positioning attachment points.

Lightweight, easy to don with five points of adjustment to ensure a better fit. Available with carbon steel, stainless steel or plastic coated pressed steel dielectric fittings, this harness is suitable for fall arrest, work restraint and work positioning.

Product Features

  • Attachment Points Rear D fall arrest attachment point (Dorsal)
    Front D fall arrest attachment point (Sternum)
    Side D work positioning attachment points
  • Fittings Carbon steel, black powder coated
    Stainless steel
    Dielectric plastic coated pressed steel
  • Webbing Polyester webbing, water repellent & uv resistant
  • Padding Padded waist belt - thermo formed
    Padded leg loops - thermo formed
    Optional detachable shoulder yoke - thermo formed
  • User Weight 150kg Maximum [Including tools and equipment]

Standards

  • EN 361, EN 358
TDS-04-PBH01-IS5-3

Attachment Point

The front and rear “D” ring is safe to connect to any EN compliant fall protection system.

TDS-04-PBH01-IS5-4

Reinforced Webbing

Potential stress points are reinforced to ensure an extra level of safety and durability.

TDS-04-PBH01-IS5-5

Label Pouch

All individual Harness information is kept securely inside the label pouch for easy reference and protection.

TDS-04-PBH01-IS5-6

Trapezoidal Buckles

Angled buckles ensure that harness webbing follows the contours of the body for a more comfortable and secure fit.

TDS-04-PBH01-IS5-7

Fall Arrest Indicator

Fall arrest indicating tabs allow the user to easily and confidently determine if the harness has been subjected to fall forces.

TDS-04-PBH01-IS5-8

End Stops

Webbing ends are finished with a tactile, branded rubber end stop.

TDS-04-PBH01-IS5-9

Contrast Stitching

Contrast stitching is used for easy inspection, prior to donning.

Product Features

The PBH04 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.

Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted for fall arrest but is primarily for work positioning. Side “D” are for work positioning only.

For fall arrest the PBH04 must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN.

When used for fall arrest a pre-determined rescue plan must be a part of your safe system of work.

Recommended minimum anchor strength – 12kN.

  • 1. 100% Polyester Webbing
  • 2. Sternum Fall Arrest Attachment
  • 3. Trapezoidal Buckles
  • 4. Dorsal Fall Arrest Attachment
  • 5. Label Pouch
  • 6. Fall Arrest Indicators
  • 7. Waist Belt With Side Work Positioning Points
  • 8. Padded Leg Loops
TDS-07-PBH04-IS5-17
1
2
3
4
5
6
7
8
Products: Vantage Back to: PBH04 four point harness

Thank you for your interest in PBH04

Please enter your email address to receive more information about PBH04.