
PBH02D dielectric harness
Designed for the Utilities market, and specifically overhead line teams doing hands on “hot glove” work on live wires, the PBH04D features electrically insulated non-conductive fittings, ensuring that there are no metal components in close proximity to live conductors.
Plastic coated pressed steel fittings offering a minimum 9kV dielectric resistance.
The adjustable rear “D” is compatible for safe connection to any EN compliant fall protection system.
Body and Leg adjustment ensure a snug fit can be achieved and maintained. The dielectric buckles prevent metal to metal contact.
Grey contrast stitching is used so that on inspection, prior to donning, the user can determine the integrity of the harness.
High strength and resistance to abrasion. Resistant to UV, acids, alkalis, oil, water and mildew.
All individual harness information is kept secure inside the label pouch for protection and easy reference.
The PBH04D is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.
Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted for fall arrest but is primarily for work positioning.
The PBH04D must be used in conjunction with an energy absorber or load limiting device.
Maximum impact force 6kN.
Recommended minimum anchorage strength 12kN.