Skip to main content

PBH07 - two-point harness with hi-vis gilet

The PBH07 Harness takes our best selling PBH02 full body harness and incorporates a Hi-Visibility waist coat. The waist coat serves to ensure maximum visibility over the harness and also as a protective layer between your harness and any harmful materials such as paint, mastic and other potential contaminants. The front & rear D’s protrude through the waistcoat. The Vantage harness is lightweight, easy to don with four points of adjustment to ensure a better fit. Available with carbon steel, stainless steel or plastic coated pressed steel dielectric fittings, this harness is suitable for Fall Arrest and Work Restraint as well as Work Positioning on inclined surfaces via a rope and grab.

Product Features

  • Attachment Points Rear D fall arrest attachment point (Dorsal)
    Front D fall arrest attachment point (Sternum)
  • Fittings Carbon steel, black powder coated
    Stainless steel (optional)
    Dielectric plastic coated pressed steel (optional)
  • Webbing Polyester webbing, water repellent & uv resistant
  • Padding Optional detachable shoulder yoke - thermo formed
  • User Weight 150kg Maximum [Including tools and equipment]

Standards

  • EN361
TDS-04-PBH01-IS5-3

Attachment Points

The front and rear “D” rings are safe to connect to any EN compliant fall protection system.

TDS-04-PBH01-IS5-4

Reinforced Webbing

Potential stress points are reinforced to ensure an extra level of safety and durability.

TDS-04-PBH01-IS5-5

Label Pouch

All individual Harness information is kept securely inside the label pouch located on the back support strap for easy reference. *

TDS-09-PBH6-IS4-5

Trapezoidal Buckles

Angled buckles ensure that harness webbing follows the contours of the body for a more comfortable and secure fit.

TDS-10-PBH07-IS5-7

Yellow or Orange

Optional fabric colours to suit a range of industry requirements.

TDS-04-PBH01-IS5-9

Contrast Stitching

Contrast stitching is used for easy inspection, prior to donning.

Product Features

The PBH07 incorporates a high visibility jacket into our standard 2-point PBH02 harness, providing the safety & comfort of the PBH02 with the added benefit of high visibility, but keeping the fall arrest attachment points available.

Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted but is primarily for work positioning.

For fall arrest the PBH07 must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN.

When used for fall arrest a pre-determined rescue plan must be a part of your safe system of work.

Recommended minimum anchor strength – 12kN.

  • 1. 100% Polyester Webbing
  • 2. Sternum Fall Arrest Attachment
  • 3. Trapezoidal Buckles
  • 4. Dorsal Fall Arrest Attachment
  • 5. Back Support / Label Pouch *
  • 6. Fall Indicating Tabs
  • 7. Leg Loops
TDS-10-PBH07-IS5-18
1
2
3
4
5
6
7
Products: Vantage Back to: PBH07 two-point harness with hi-vis gilet

Thank you for your interest in PBH07

Please enter your email address to receive more information about PBH07.