Skip to main content

XL Riser Post - checkline II

The Riser Post is used to support the Intermediate and Corner brackets at a standard raised height of 250mm (10”) from the fixing surface. Other heights can be manufactured to suit individual project requirements. The post is foam filled to prevent thermal bridges from occuring by utilising insulation and a sealing gasket which is required and supplied with the riser post. The Riser Post is secured directly to its roofplate via an M20 nut secured in the base. The TopFix posts are secured to the Riser Post using M8 Hex Bolts. A range of base plates are available depending on requirements. No plate is included with this part and must be ordered seperately.

Principal Materials

  • Body Stainless Steel - Powder Coated Grey
  • M8 Studs Stainless Steel

Standards

  • These components form part of the Checkmate EN795 system

Dimensions

TDS-25-XL-Riser-Post-IS5-6

Disclaimer

Component must be used as part of a complete Checkmate Checkline SLL system, comprising of Checkmate components ONLY.

Structural engineer approval is required by building owner. Specifying and installing Checkline requires training and written approval from Checkmate – contact Checkmate for details.

Products: Installed Systems Back to: XL Riser Post checkline II

Thank you for your interest in XL Riser Post

Please enter your email address to receive more information about XL Riser Post.